Petzl ID Evac Self-braking Descender

Designed for evacuation and rescue only.

Key Features

• Auto-lock system locks the load automatically
• Anti-panic function helps to reduce the risk of an uncontrolled descent
• The rope can be loaded without removing the device from the anchor
• Stainless steel wear plate improves durability
• Device marking helps to install the rope properly
• Anti-error catch helps prevent incorrect rope installation
• Two descent modes – over the stainless-steel wear plate or in the v-shaped rope friction channel
• Ergonomic handle for controlled descents
• Rope can be pulled through the device without manipulating the handle (during occasional ascent or a reverse haul system)
• Grub screw used to captivate the I’D in a pre-rigged rescue kit
• Maximum descent speed of 2 metres per second (2m/s) (0.5 metres per second (0.5m/s) for loads over 120kg
• 250kg rescue capacity

Compatibility

• Use the Petzl I’D Evac with low stretch rope conforming to EN 1891 Type A with a diameter between 10mm-11.5mm
• For rescue, use low stretch rope conforming to EN 1891 Type A with a diameter between 10.5mm-11.5mm